To Stop Adding to the Problem, Use Climate Positive Design

Climate Positive Design

Let’s be frank: landscape architecture projects can add to the climate crisis. If projects aren’t purposefully designed and built with their carbon footprint in mind, they may be contributing more greenhouse gas emissions to the atmosphere than they can sequester over their lifespan. Projects can incorporate too much concrete and other carbon-intensive materials, too few trees and shrubs, or require industrially-produced fertilizers or gas-powered mowers or pruners for long-term maintenance, running up long-term emissions.

Instead, landscape architects can design and build projects that are not only meant to be carbon neutral, but go further and become “climate positive,” meaning that over their lifespan they sequester more greenhouse gas emissions than they embody or produce.

To help landscape architects reach this goal, Pamela Conrad, ASLA, a principal at CMG Landscape Architecture in San Francisco, has created an inventive new platform: Climate Positive Design.

She has also thrown down the gauntlet with a new challenge: if all landscape architects and designers use the approach, they could reduce greenhouse gas emissions in the atmosphere by 1 gigaton by 2050. That would put landscape architecture well within the top 80 solutions found in the Project Drawdown report.

Climate Positive Design

According to Conrad, Climate Positive Design “is not only an opportunity to re-imagine how we design our world from every aspect, but a responsibility.”

Using the site’s Pathfinder tool, landscape architects and designers can establish and then ratchet up specific sequestration and emission reduction targets for their own projects. “A target of five years is suggested to offset carbon footprints for greener projects like parks, gardens, campuses, and mixed-use developments. For more urban projects that require a greater amount of hardscape to accommodate programming, twenty years is the targeted offset duration.”

Through her research, which includes illustrative and useful case studies produced with CMG, Conrad found that “targets could be met without changing the program or reducing the quality – the projects merely became greener.”

Case study / Climate Positive Design

The website offers a design toolkit that not only shows landscape architects how to incorporate more trees and shrubs and preserve carbon in soils, but also how to replace carbon-intensive materials used in pathways, walls, fences, and furnishings with low-carbon alternatives. Conrad makes it easy to find sustainable options.

A few details about the process: Landscape architects or designers who log a project in the app are asked to input the sources of carbon, which could include “approximately eighty different types of materials used in landscape projects such as paving, walls, fences etc. and their associated ‘embodied carbon’ from extraction, manufacturing, transportation, installation, use/maintenance and replacement. The data is derived from the Athena Impact Estimator.”

Then designers are asked to add in data about the carbon sinks they are incorporating, which could include: “trees, plants, wetlands and certain types of meadows/lawns capture CO2 from the atmosphere and sink carbon into the soil.” Conrad notes that “all data used for calculating sequestration and decomposition for trees and shrubs is obtained from the U.S. Forest Service.”

Lastly, landscape architects and designers can add in the “carbon costs,” which “represent emissions associated with mowing/pruning performed using machinery and fertilizer use for trees and shrubs. These emissions occur regularly over the lifespan of the project and are often referred to as ‘operational carbon.'”

Once this information is submitted, landscape architects will receive a Climate Positive score that indicates how long it will take to offset the carbon embedded in the project or expended through maintenance operations. The website will then send design recommendations for reducing emissions and increasing sequestration much faster. And each project has a dedicated page that can be re-visited and re-evaluated or shared.

Climate Positive Design

Data collected through the app will be reviewed by advisory partners including
the Landscape Architecture Foundation (LAF), American Society of Landscape Architects (ASLA), Canadian Society of Landscape Architects (CSLA), International Federation of Landscape Architects (IFLA), and the Landscape Architecture Canada Foundation (LACF).

Conrad formulated the system during her Landscape Architecture Foundation (LAF) fellowship. It’s also the result of years of research and collaboration with Atelier Ten.

Go to Climate Positive Design.

Also, check out ASLA’s guide to climate change mitigation and landscape architecture and series of sustainable residential design guides.

3 thoughts on “To Stop Adding to the Problem, Use Climate Positive Design

  1. milliontrees 10/09/2019 / 2:54 pm

    Yes, proposed landscape designs should be judged partly on their ability to reduce carbon loss and increase carbon storage, but they should also address other climate issues. For example, is the proposed planting palette suitable to current climate conditions?

    The current obsession with planting exclusively native plants frequently results in landscapes that fail because of changed conditions. Sometimes existing landscapes are destroyed and replaced with native plants that require irrigation. In the case of trees, it is necessary to look further into the future. Will they survive projected changes in the climate in the next hundred years?

    I am so tired of watching these landscape installations fail in my public parks and civic spaces. When healthy trees are destroyed and replaced with trees that die of drought within a few years, it is heartbreaking.

    When the climate changes, the vegetation changes. Landscape architects should lead the way to educate the public about these realities. They have horticultural knowledge needed to give such advice to the public.

  2. Michael Slater 10/10/2019 / 12:21 am

    One issue that “climate positive design” should consider is the carbon cost to produce, ship, and plant nursery-grown trees. Current research indicates it may take up to twenty years for a nursery-grown tree once planted to offset (sequester) the carbon generated in its own production. If the research is correct, trees are not “carbon sinks’ until well after the 5 and 10 year horizon suggested by Conrad (unless she has already factored in to the model the carbon output for nursery-grown trees).

  3. ecotonelanddesign 10/10/2019 / 2:38 pm

    Keep in mind that “carbon” does not necessarily equal “pollution” and that there are scientist who are pointing out that we are actually at a low point for CO2 in the atmosphere, which could be a threat to the abilities of plants to flourish. There are always more sides to an issue that the one that is getting harped on at the moment.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.